Price:
$1600-$2000
Model:
SOP-MB101
Exterior Size
1400*1200*2200mm
Internal Size:
1200*1000*1990mm
Maximum Occupancy:
1 person
Material:
Acoustic panel+Sound absorbing material+Hollow wood plywood+Tempered glass
Power:
110 - 240V/50Hz & 12V-USB
Light:
4000K natural light
Voltage:
110-240V
Weight:
400kg
Certification:
ISO CE
SOP-MB101 · single-person music booth
A soundproof music practice booth has to accommodate the performer, the instrument, the session equipment, and the way cables enter the enclosure. This model is listed with an outside size of 1400*1200*2200mm and an inside size of 1200*1000*1990mm. Those numbers give a buyer a useful starting point, but the final choice should be tested against the player's actual setup rather than an empty floor outline.
For vocal rehearsal, the main questions are standing space, microphone position, ventilation, and a clear cable route. Instrument practice adds chair movement, stands, cases, and heat from equipment. Recording work may also need an external interface connection. The booth includes an external cable hole for that connection, so the signal path can be planned before installation.
The 1200*1000*1990mm listed internal space is intended for one person. Mark that internal rectangle on the floor, then place the chair, music stand, microphone stand, or compact instrument setup inside it. This simple test reveals whether the player can enter, turn, and reach controls without repeatedly moving equipment.
The listed weight is 400kg. Floor suitability, delivery access, lift capacity, doorway clearance, and the assembly route therefore belong in the early site review. These checks are more useful than choosing a finish first.
The listed electrical configuration is 110-240V/50Hz with 12V-USB, and the lighting is listed as 4000K natural light. Confirm the supplied socket format and regional electrical details for the installation country. If an audio interface or other equipment remains outside the booth, define the cable count and connector size before assembly so the external cable hole is used intentionally.
The source specification describes low-noise exhaust operation and refreshing internal air in three minutes. Treat this as a listed configuration to verify with the supplier for the final model and site. A practical review should consider session length, performer heat, and equipment heat rather than relying on the ventilation statement alone.
It depends on the instrument envelope and the player's movement. Mark out 1200*1000mm, place the normal chair and stands inside it, and confirm door use before selecting this one-person model.
The listed external cable hole is intended to connect the cabin with external equipment. Confirm connector sizes, cable count, and the final route with the supplier.
Request test information for the proposed booth configuration and explain the source activity and adjacent-room requirement. Interior absorption and room-to-room isolation should be reviewed separately.
The listed construction combines acoustic panel, sound-absorbing material, hollow wood plywood, and tempered glass. The specification also states that 60% of the acoustic interior uses sound-absorbing material. That interior treatment is relevant to reflections inside the booth; it should not be read as a complete sound-isolation rating.
Ask for the acoustic test information that applies to the proposed configuration, then compare it with the source level and the acceptable sound level in the adjacent room. A singer, an amplified instrument, and spoken-word recording do not place the same demand on an enclosure. Site placement, assembly quality, seals, and surrounding construction also affect the result.
Define the source, the neighboring space, and the acceptable disturbance before asking whether a booth is “soundproof.”
| Product Name | Soundproofing Practice Music Booth |
| Appearance Size | 1400*1200*2200mm |
| Internal Size | 1200*1000*1990mm |
| Power Supply System | 110-240V/50Hz & 12V-USB |
| Lighting System | 4000K natural light / 150Lsx. |
| Exhaust System | Low noise and refreshing internal air in 3-minute operating efficiency. |
| Acoustic Interior | 60% sound absorbing material. |
| Anti-wear Exterior | Nanometer PP facing, resistance to friction, pollution, ultraviolet rays, fire and moisture. |
| External Cable Hole | Connection between the cabin and external equipment. |
| Application | Qualified for Office / School / Home / Recording / Exhibition Hall / Library / Hospital / Shopping Mall ect. |
Plan mobile sound isolation booths for vocals around performer space, power, lighting, airflow, acoustic evidence, and a safe installation route....
A soundproof music studio booth for vocals, instruments, and podcasts. Features acoustic insulation, 4000K lighting, and 100v-230v power for clear recordings....
Tel: +8613538031763
Email: info@sopworkpod.com
MP/WhatsApp: +8613538031763
Manufacturer Address:Liucheng Lujiang District,Meixi Road,Nanan City,Fujian,China
This music recording booth provides excellent sound isolation, creating a perfect environment for clear and professional recordings. The build quality is solid, and it reduces outside noise effectively2025-01-13
This soundproof music practice pod is an absolute game changer! It provides an incredibly quiet space to focus on my music without distractions, and the acoustic design ensures clear, undisturbed sound for practice sessions2025-01-13
The music recording booth has significantly improved the quality of my recordings. The soundproofing is excellent, creating a clean and quiet environment that allows me to capture every detail of my vocals and instruments.2025-01-13
The music isolation booth significantly reduces external noise, creating a focused space for recording. It’s easy to assemble and fits well in my home studio.2025-01-13